China MG-1A Aluminum Alloy with PTFE Tape Self-Lubricating Bearing Supplier, Manufacturer, Factory which can deliver not only high-performance products but also high-level services, such as material selection, simulation test, engineering design and installation.

PTFE Bantlı Kendinden Yağlamalı Rulmanlı MG-1A Alüminyum Alaşımlı

Ana Sayfa >> Kataloglar >> Metal-Polimer Kompozit Rulmanlar >> PTFE Bantlı Kendinden Yağlamalı Rulmanlı MG-1A Alüminyum Alaşımlı

İçerik

Gelişmiş Arama

Marjinal Rulman mg-1a alüminyum alaşımlı, ptfe bantlı, kendinden yağlamalı rulman, kendinden yağlamalı rulmanlar ve burçların uzman üreticisi, 2010 yılında kurulan Marginal Bearing, kendisini yeni kendinden yağlamalı rulman malzemeleri geliştirmeye ve üretmeye adamıştır.

Profil
Ürün Listesi
Uygulama Özelliği

PTFE Bantlı Kendinden Yağlamalı Rulmanlı MG-1A Alüminyum Alaşımlı

This material structure enables the final parts tube lighter and easier for installation. Suitable for dry running,low coefficient of friction, lower wear, good sliding characteristics,the transfer film created can protect the mating metal surface,suitable for rotary,linear and oscillating movement.

◆ Technical Data:

Technical Data
Max.load	Static	80 N/mm
	Very low speed	40N/mm
PV (dry running) Max.	Roatating oscillating	20N/mm
	Short-term operation	2.8N/mm2·m/s
	Continuous operation	1.8N/mm ·m/s
Temp. limit	-65℃~+260℃
Friction coenncient	0.05~0.20
Max. speed	Dry running	1m/s
	Hydrodynamic operation	>2m/s
Thermal conductivity	230 W(m·k)-1
Coenncient of thermal expansion	24×10 ·K